SELLEYS Knead It Steel 50g Adhesives and Sealants Supplier, Suppliers, Supply, Supplies ~ Safety Solutions (M) Sdn Bhd

Safety Solutions (M) Sdn Bhd
43 & 43A, Jalan Perepat 27/95, Section 27, 40000 Shah Alam, Selangor, Malaysia.

1700-81-8025 (Hotline)
+603-5192 7333 (Office)

+603-5192 9333

sales@safetysolutions
.com.my

Message Us

SELLEYS Knead It Steel 50g

8 / 9

Description

A versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for repairing ferrous and aluminum metal items. It comes in a handy roll form, with the black hardener encapsulated in the grey resin part. The product hardens in 5-10 minutes, after mixing, to a black metal-like material.

Features

Will not sag, run or drip
Easy to use - no mess
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
Good adhesive strength
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
Good gap filling properties
Long-lasting, durable solution
Heat resistant to 120°C continuously or 140°C intermittently
Can be used under water. (but dry surfaces for application are best and recommended)
Rapid set time (<10 minutes)
Can be used for fuel resistant repairs.

Ideal for

Steel
Wide range of terrous metal and aluminum items
Most plastics (pre-test required)
Glass

Direction

Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Multi Purpose will harden and begin to form a strong bond.
After 60 minutes Knead-It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water before product hardens.

Safety tips

Where possible wear protective gloves when using Knead-It Multi Purpose. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*